Installation Guide

INSTALLATION INSTRUCTIONS (cont...)
Undermount/
Topmount Sinks
THE STEPS
MORE ON FRONT
877.946.5725 • Toledo, Ohio • [e-mail] • www.MRDirectInt.com
THE INSTALLATION OF ANY
TOPMOUNT-STYLE SINK
Determine the locations for the clip brackets around
the perimeter of the sink. Pre-drill holes for the
clips using appropriate methods for the countertop
material.
Clean the surfaces of the sink and countertop which
will meet, with denatured alcohol.
Evenly apply a bead of silicone along perimeter edge
of the opening on the top of the countertop.
Carefully align the sink over the countertop opening.
Evenly apply pressure to the sink securing a seal of
silicone against the countertop.
Verify the sink is evenly aligned with the countertop.
Attach and tighten the clip brackets against the edge
of the sink. Do not tighten one screw completely
before others. Partially tighten one clip then the one
across from it, and so on until all clips are fully
tightened. This will safeguard against an uneven or
insecure installation.
Use a cloth with denatured alcohol along the
perimeter of the sink and countertop to remove any
excess sealant.
LOCKER
SINK
SCREW
CLIP
COUNTERTOP
T3121L
Topmount TruGranite/Quartz Holes
US Series
Due to the nature of the T3121L clip system please cut
the countertop in accordance with the supplied cutout
template.
TOPMOUNT TRUGRANITE/QUARTZ SINKS
Every Topmount Trugranite/Quartz sink has pre-
scored holes to accommodate the desired location of
faucet and accessories. The holes can be located on
the underside of the faucet deck of the sink. There
may be yellow-dotted circle labels at the topside to
help identify where to nd these pre-scored holes.
Before knocking the holes out, verify the yellow-
dotted circle labels align with the actual location of the
embossed holes on the underside of the sink. Then,
carefully knock the holes out from the topside of the
sink using a screwdriver and hitting it gently with a
hammer. Use a metal hole saw or jigsaw to enlarge
the opening if necessary.
PRESCORED HOLE