Installation Guide

More on Front q
Determine the locations for the
clip brackets around the perime-
ter of the sink. Pre-drill holes for
the clips using appropriate meth-
ods for the countertop material.
Clean the surfaces of the sink
and countertop which will meet,
with denatured alcohol.
Evenly apply a bead of silicone
along perimeter edge of the
opening on the top of the coun-
tertop.
Carefully align the sink over the
countertop opening.
Evenly apply pressure to the sink
securing a seal of the silicone
against the countertop.
Re-check that the sink is evenly
aligned with the countertop.
THE STEPS
INSTALLATION
CONTINUED
877.946.5725
Toledo, Ohio
[e-mail]
www.MRDirectInt.com
Topmount
Sinks
Attach and tighten the clip
brackets against the edge
of the sink. Do not tighten
one screw completely before
others. Partially tighten one
clip then the one across from it,
and so on until all clips are fully
tightened. This will safeguard
against an uneven or insecure
installation.
Use a cloth with denatured
alcohol along the perimeter
of the sink and countertop to
remove any excess sealant.