Installation Guide

Attach and tighten the clip brack-
ets against the edge of the sink.
Do not tighten one screw com-
pletely before others. Partially
tighten one clip then the one
across from it, and so on until all
clips are fully tightened. This will
safeguard against an uneven or
insecure installation.
Remove any excess silicone
along the sink lip under the
countertop.
Use a cloth with denatured
alcohol along the inner perimeter
of the sink and top of counter to
remove any excess sealant.
Using the template provided,
measure and cut the hole in the
countertop.
Determine the locations for the clip
brackets around the perimeter of
the sink. Pre-drill holes for the clips
using appropriate methods for the
countertop material.
With denatured alcohol, clean the
surfaces of the sink and counter-
top which will meet.
Evenly apply a bead of silicone
along perimeter edge of the
opening on the underside of the
countertop.
Carefully align the sink under the
countertop opening.
Evenly apply pressure to the sink
securing a seal of the silicone
against the countertop.
Re-check that the sink is evenly
aligned with the countertop.
More on Front q
THE STEPS
INSTALLATION
CONTINUED
877.946.5725
Toledo, Ohio
[e-mail]
www.MRDirectInt.com
Unde rmount
Sinks