Install Instructions

Page 18
mrcool.com
Installation Instructions
4
INSTALL AIR CONDITIONER TO BRACKET
IMPORTANT
Before proceeding to the next step, measure the
width of your window track (the vertical track
your window slides up and down in) before
installing your air conditioner. If it is 1/2 in (12.7
mm) or less, flip the Anti-Tip Bracket so the small
end faces out, then continue with the installation.
Refer to the image to the right.
This side faces indoors
A. Set the air conditioner on top of the support bracket. Ensure the grooves on the bottom of
the air conditioner align with the Main Supports. Please refer to Fig. 12 & Fig. 13 below. Using
a level, ensure that the unit has the proper amount of tilt towards the outside.
Fig. 12
Fig. 13
B. Now, pull the window down into the slot to help align and position the unit into the correct
location. Keep the window partially inserted into the the window slot to help support the air
conditioner during the installation. Then, fold down the Side Arm Hinges on both sides of the unit.
Please refer to the Fig. 14 & Fig. 15 below.
Fig. 15
Fig. 14
WARNING
DO NOT leave the unit unattended during
the installation