User Manual
19
Do you still have questions? You can call us toll-free at the Consumer Service 
Department, 1-800-MR COFFEE (1-800-672-6333) or you can visit us at 
www.mrcoffee.com. 
SERVICE AND MAINTENANCE
Replacement Parts
•Forotherreplacementparts–Call1-800-MRCOFFEE(1-800-672-6333)
in the U.S. or 1-800-667-8623 in Canada. You may also find a list of 
replacement parts at www.mrcoffeebarista.com.
Repairs
If your Café Barista (espresso, cappuccino & latte maker) requires service, 
do not return it to the store where you purchased it. All repairs and 
replacements must be made by Sunbeam or by an authorized MR. COFFEE
®
Products Service Center. If you live in the U.S. or Canada, please call us at 
the following toll-free telephone numbers to find the location of the nearest 
authorized service center:
  U.S. 1-800-MR COFFEE (1-800-672-6333) 
  Canada 1-800-667-8623
You may also visit our website at www.mrcoffee.com for a list of service centers. To 
assist us in serving you, please have the model number and date of purchase available 
when you call. The model number is on the bottom of the unit.
We welcome your questions, comments or suggestions. In all your communications, 
please include your complete name, address and telephone number and a description 
of the problem.
1-YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if 
in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden 
Consumer Solutions (collectively “JCS”) warrants that for a period of one year 
from the date of purchase, this product will be free from defects in material 
and workmanship. JCS, at its option, will repair or replace this product or 
any component of the product found to be defective during the warranty 
period. Replacement will be made with a new or remanufactured product or 
component. If the product is no longer available, replacement may be made 
with a similar product of equal or greater value. This is your exclusive warranty. 
Do NOT attempt to repair or adjust any electrical or mechanical functions on 
this product. Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of initial 
retail purchase and is not transferable. Keep the original sales receipt. Proof 
of purchase is required to obtain warranty performance. JCS dealers, service 
centers, or retail stores selling JCS products do not have the right to alter, 
modify or any way change the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from 
any of the following: negligent use or misuse of the product, use on improper 
voltage or current, use contrary to the operating instructions, disassembly, 
18
TROUBLESHOOTING YOUR  
MR. COFFEE
®
 CAFÉ BARISTA
PROBLEM CAUSES SOLUTIONS
Coffee does not 
come out.
•Nowaterinreservoir.
•Coffeegrindistoone.
•Toomuchcoffeeinthelter.
•Appliancewasnotturned
on or plugged in.
•Coffeehasbeentamped/
compressed too much.
•Addwater.
•Grindmediumgroundcoffee.
•Filllterwithlesscoffee.
•Plugunitintoelectrical
outlet and turn it on.
•Relllterbasketwithcoffee
DO NOT TAMP too much.
Coffee comes 
out around the 
edge of the 
porta-lter.
•Porta-lternotrotatedto
full lock position.
•Coffeegroundsaround
thelterbasketrim.
•Toomuchcoffeeinthelter.
•Rotatelterholdertofull 
lock position.
•Wipeoffrimandshower
head seal. 
•Fillwithlesscoffee.
Milk is not foamy 
after frothing or 
it is not coming 
out of the 
frothing tube.
•Ranoutofsteam.
•Milkisnotcoldenough.
•Frothingtubeisblocked.
•Ensurethereisenough
water in the water 
reservoir.
•Chillmilkandfrothing
pitcher prior to making 
cappuccino or latte.
•Followtheinstructionsto
clean the milk reservoir & 
frothing tube.
Coffee comes 
out too quickly.
•Groundcoffeeistoocoarse.
•Notenoughcoffeeinlter.
•Useanergrind.
•Usemorecoffee.
Coffee is too 
weak.
• Usingsmalllterfordouble
shot of espresso.
• Ground coffee is too coarse.
• Uselargelterfordouble
shot of espresso.
• Useanergrind.
The three 
control panel 
lights are flashing 
alternatively.
•Watertankisoutofwater. •Addwatertoreservoir.
Cappuccino 
and/or Latte 
control button 
lights do not 
illuminate.
•MilkReservoirnotinserted.
•MilkReservoirnotfully
inserted.
•PlaceMilkReservoironunit.
•IfMilkReservoirison
unit,pushinrmlyuntil
Cappuccino and Latte 
control button lights 
illuminate.
Water is not 
being pulled in 
from the water 
reservoir.
•  Red plug was not removed 
from base of water 
reservoir tank.
•  Water reservoir tank not 
placed correctly on unit.
•  Remove red plug from 
base of water reservoir 
tank. Red plug may also 
be found in hole on unit 
where water reservoir 
attaches at its base.
•  Place water reservoir 
correctly.
BVMC-ECMP1000_BVMC-ECMP1001_13ESM1.indd 19-20 9/30/13 2:33 PM










