Instruction Manual

4
Step 3-A Tree Assembly (Figure 9 ~ 11)
3.1 Locate the bottom section (B or C depending on
tree size) and insert into the top of tree stand.
(Figure 9).
3.2 Fully tighten the 3 pins into place. Secure the tree
base firmly to the tree stand. (Figure 10).
3.3 Insert the remaining section (A or B+A depending
on tree size) in the proper order. (Figure 11)
Figure 9 Figure 10
Figure 11
IMPORTANT TREE SET UP TIPS:
1. Shake the tree well after assembly to
ensure the branches are extended.
2. Some shaping of the tree may be
required for best appearance.
3. Spare bulbs are included in a small
bag inside the tree. Remove from the
tree and keep in case replacement is
needed.
“The pole caps that are shipped with the trees should be saved and used for storage to protect the power poles.”