Mr.
Step 1: Check the contents of your box 1.1 Your tree will come in various combinations depending on 5 ft 6.5 & 7.5 & 9 ft the size. (Figure 1) 1.2 A metal tree stand with 3 eyebolts. (Figure 2) 1.3 Control box and power cord with adaptor. (Figure 3) 1.4 “Ornament” with voice activated command list. (Figure 4) 1.5 Number of spare bulbs for each: 4 (5 ft) /6 (6.5 ft) /10 (7.5 ft) /12 (9 ft) (Figure 5). These can be found in the poly bag attached to the end of the light strand inside the tree.
Step 2: Stand Assembly ( Figure 6 ~ 8 ) Place the stand in your desired location as once the tree is fully assembled it may be too difficult to move and relocate. 2.1 Open the tree stand to form an “X”. (Figure 6 and Figure 7) 2.2 Align the threaded holes to insert each eyebolt. Make only a few clockwise turns leaving room to insert bottom section.
Step 3-A Tree Assembly (Figure 9 ~ 11) IMPORTANT TREE SET UP TIPS: 3.1 1. Shake the tree well after assembly to Locate the bottom section (B or C depending on tree size) and insert into the top of tree stand. ensure the branches are extended. (Figure 9). 3.2 2. Some shaping of the tree may be Fully tighten the 3 pins into place. Secure the tree required for best appearance. base firmly to the tree stand. (Figure 10). 3.3 3.
Step 3-B Start at the bottom row of branches and work inside to out Spread out individual branches to sides, up and out (like a fan) until you reach the last tip.
Step 4: Connect Controller and AC Power Adaptor (Figure 12) Attach the power cord with adaptor to the control box, plug the adaptor into an AC power source.
Step 5: Connect to Alexa 1. Download the “Amazon Alexa” application from the app store on your mobile device . 2. Install and open the “Amazon Alexa” application. 3. Go to the settings menu. 4. Select “Add Device” 5. Select “Christmas Tree” and follow the on-screen instructions. 6. To set up a second tree, select “Second Christmas Tree” and follow the on-screen instructions. Alexa will ask for clarification if a command does not target a specific tree.
Step 6-A: Change your Christmas Tree LED lighting Mode using Alexa Follow the voice commands for a list of functions to achieve up to 55 lighting functions. (Figure 14) Figure 14 Color options Command – “Set Christmas tree to” : 1. White 2. Red 3. Green 4. Yellow 5. Blue 6. Purple 7. Light blue 8. Starlight 9. Multi Color Light functions Command – “Set Christmas tree to” : A. Steady B. Fade C. Flip D. Sparkle E. Twinkle F. Trio Brightness Settings Command – “Set Christmas tree to” : I. High II.
Step 6-B: Manually change your Christmas Tree LED lighting mode Push Button on Control Box to switch Christmas Tree LED Light Mode. There are a total of 55 lighting modes: 00. Power Off 01. White Steady 02. Red Steady 03. Green Steady 04. Yellow Steady 05. Blue Steady 06. Purple Steady 07. Light Blue Steady 08. Starlight Steady 09. Multi Color Steady 9 10. White Fade 11. Red Fade 12. Green Fade 13. Yellow Fade 14. Blue Fade 15. Purple Fade 16. Light Blue Fade 17. Starlight Fade 18.
Step 6-B: Manually change your Christmas Tree LED lighting mode (cont'd) 19. White Flip 20. Red Flip 21. Green Flip 22. Yellow Flip 23. Blue Flip 24. Purple Flip 25. Light Blue Flip 26. Starlight Flip 27. Multi Color Flip 28. White Sparkle 29. Red Sparkle 30. Green Sparkle 31. Yellow Sparkle 32. Blue Sparkle 33. Purple Sparkle 34. Light Blue Sparkle 35. Starlight Sparkle 36. Multi Color Sparkle 37. White Twinkle 38. Red Twinkle 39. Green Twinkle 40. Yellow Twinkle 41. Blue Twinkle 42. Purple Twinkle 43.
Step 6-C: Automate your Christmas Tree with Routines Alexa Routines allow you to automate your Christmas Tree Functionality. With Routines, you can turn your tree on with custom commands (i.e. Good Morning) or turn the tree on/off at scheduled times (i.e. every day at 10 AM) How to Enable Routines with Alexa. 1. Open the Alexa app. 2. Go to the menu and select “Routines” 3. Select Plus 4. Select “When this happens”, and then choose how to begin your Routine (i.e. “Good Morning, or a scheduled time). 5.
Example 1: Turn Christmas Tree ON “Alexa, Turn Christmas tree: ON.” Example 2: Set lighting mode to Red “Alexa, Set Christmas tree to: Red.” Example 3: Set brightness mode to High “Alexa, Set Christmas tree to: High.
Example 4: Set lighting mode to Fade “Alexa, Set Christmas tree to: Fade.” Example 5: Set lighting mode to Demo “Alexa, Turn Christmas tree Demo On.” Example 6: Turn Christmas Tree on with Routine “Alexa, Good Morning / Good Night.
Connectivity Troubleshooting 1. I can't connect my device to Alexa. • Check your WI-FI settings • Make sure that your Alexa device and your Christmas Tree are connected to the same Wi-Fi network. • Make sure that all devices have the most updated Wi-Fi password. • Check the distance to your Alexa smart speaker • Check that your device is within 30 ft. (9 m) of your Christmas Tree. • Check your software version • Check that your Alexa device and the Alexa app have the latest software version. 2.
4. • Open the "Amazon Alexa" application. • Go to the settings menu. • Select "Add Device" • Select "Christmas Tree" and follow the on-screen instructions. I can only turn my Christmas Tree On and Off with Alexa. • Although the Alexa tree can be added to a group, the color and function selections will not work using the group name. • Color and Function can only be selected by using the utterance "Christmas Tree." 5.
IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the Following: a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS. b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided contact a qualified for proper installation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
