User manual

A-

-2 FEATURES

2 FEATURES2 FEATURES

2 FEATURES

1. Multiple microprocessor design base

2. Compatible with both linear and non-linear load

3. Battery size support up to 600AH* (*based on C/10 charging rate at 60A charging current, though

larger sized batteries can still be used). System design is based on lead

leadlead

lead-

-acid batteries only

acid batteries onlyacid batteries only

acid batteries only.

4. 24-hour inverter operation

5. DC start and automatic self-diagnostic function

6. THD less than 3%

7. High efficiency design to save electricity; low heat dissipation in extended operation

8. Designed to operate under harsh environment

9. 3U 19” wall-mounted design

10. Solar power charger with maximum 50A from an array

11. Detachable front panel for remote monitoring (via RJ45 straight-through network cable only)

Single-Phase Version (Standard)

Single phase models come in either 110V or 220V both input and output terminal will have 1L and 1N,

as shown below:

Split-Phase Version (only available on 4kw and 6kw models)

Split phase models accept input of 220V only (L-N) but will have an additional L on the output terminal,

so a L-N-L is available for connecting either 110V (using 1L) or 220V (using both L). Most countries that

use both 110V/220V would have 2 hotwires of 110V of opposite phase to each other, forming 220V.

Split phase model’s terminal would appear as below:

L2L2

Output

OutputOutput

Output

Input

InputInput

Input