User manual

24
Model
ModelModel
Model PIP
PIPPIP
PIP-
--
-4024LC
4024LC4024LC
4024LC PIP
PIPPIP
PIP-
--
-6048LC
6048LC6048LC
6048LC PIP
PIPPIP
PIP-
--
-8048LC
8048LC8048LC
8048LC PIP
PIPPIP
PIP-
--
-11048LC
11048LC11048LC
11048LC
Capacity
CapacityCapacity
Capacity VA / Watt
VA / WattVA / Watt
VA / Watt 5KVA / 4000W
5KVA / 4000W5KVA / 4000W
5KVA / 4000W 6KVA / 6000W
6KVA / 6000W6KVA / 6000W
6KVA / 6000W 8KVA / 8000W
8KVA / 8000W8KVA / 8000W
8KVA / 8000W 8KVA / 8000W
8KVA / 8000W8KVA / 8000W
8KVA / 8000W
Input
Nominal Voltage 220Vac; 110Vac 220Vac only
Voltage Range
Acceptable Voltage
Range
120-275Vac ; 60-135Vac 120-275Vac
Frequency
50Hz / 60Hz ( 45Hz
-
70Hz)
Line Low Transfer 120VAC ± 2% ; 60VAC ± 2% 120VAC ± 2%
Line Low Return
130VAC ± 2% ; 65VAC ± 2%
130VAC ± 2%
L
ine High Transfer
275VAC ± 2% ; 135VAC ± 2%
275VAC ± 2%
Line High Return
260VAC ± 2% ; 130VAC ± 2%
260VAC ± 2%
Output
Voltage
110/115/120 or 220/230/240VAC
adjustable via LCD
220/230/240VAC adjustable via LCD
Voltage Regulation (Battery Mode)
< 3% RM
S for entire battery voltage range
Frequency
50Hz or 60Hz
Frequency Regulation (Battery Mode)
±0.1Hz
Power Factor
0.8
1.0
Waveform Pure Sine Wave
Peak Efficiency 85% (90% with Green Power Mode)
Overload Protection
Line Mode Circuit Breaker
Battery Mode 110% ~ 150% for 30 sec. , >150% for 200ms
Transfer Time Typical < 8 ms.
Battery
Battery Voltage
24Vdc
48Vdc
Max. Charging Current > 60A > 85A
LCD
INVERTER status, I/P&O/P Voltage Frequency, Load%, Battery Voltage & %, Charge
current, Temperature, Model
Display LCD
LED
Normal (Green), Warning (Yellow), Fault (Red)
Audible
Alarm
Battery Mode
Beeping every 4 seconds
Low Battery Beeping every second
INVERTER Fault Beeping Continuously
Overload
Beeping twice per second
Environment
Operation Temperature 0-40 degree C; 32-104 degree F
Relative Humidity 0-95% non-condensing
Audible Noise Less than 55dBA (at 1M)
Physical
Net Weigh (Kgs)
49.2
51.4
53.6
110.4
L*W*H (mm)
415*600*260
415*600*260
415*600*260
452*670*277
* Specifications are subjected to change without prior notice.
OPTIONAL BUILT-IN SOLAR CHARGE CONTROLLER
Battery/System Voltage
Battery/System VoltageBattery/System Voltage
Battery/System Voltage 12V (800W)
12V (800W)12V (800W)
12V (800W) 24V (1.6~4KW)
24V (1.6~4KW)24V (1.6~4KW)
24V (1.6~4KW) 48V (6~11
48V (6~1148V (6~11
48V (6~11KW)
KW)KW)
KW)
Charging Voltage 13.8V 27.7V 55.2V
Minimum Solar Working Voltage 11.7V±0.5V 23.5V±1V 44V±3V
Max Solar Input Voltage
22.0V
22.0V22.0V
22.0V 45.0V
45.0V45.0V
45.0V 100V
100V100V
100V
Max Solar Input Current
50A
50A50A
50A 50A
50A50A
50A 50A
50A50A
50A
Max. Charging Current 50A 50A 50A
Reverse Polarity Protection YES YES YES
Reverse Current Protection YES YES YES
W*D*H 112mm * 80mm * 50mm
*Please ensure PV input voltage and current do not exceed above input specifications.