User manual

D-

-1 OUTPUT VOLTAGE & FREQUENCY ADJUSTMENT

1 OUTPUT VOLTAGE & FREQUENCY ADJUSTMENT1 OUTPUT VOLTAGE & FREQUENCY ADJUSTMENT

1 OUTPUT VOLTAGE & FREQUENCY ADJUSTMENT

After PIP-LC startup, press the Down-key to find the screen and then press Enter-key for setting.

 In this screen, press

Enter-key to enter the

following steps for output

voltage and frequency

adjustment.

 The cursor (→) will pop up

to indicate the output

voltage and frequency newly

selected.

 Use Up or Down-key to

adjust the output voltage (if

220V configure, 220V,

230V, and 240V is

selectable; if 110V

configure, 110V, 115V, and

120V is selectable). Press

Enter-key to confirm voltage

and then the cursor will

move to frequency

selection. The output

frequency (50Hz or 60Hz)

can be adjusted by the

same key operation.

 Once the correct voltage is

selected, press Enter-key

again to save the selection.