User manual

12
3. DC Input Terminals
- Array (Input):
*
Make sure the open circuit voltage (Voc) of the PV array is less than the DC maximum
input voltage and the short circuit (Isc) is less than the DC maximum charging current of the built-in
solar charge controller. See SPECIFICATION for more details.
Recommended DC wire size for PV input:
Capacity Size
800W
5.5mm
2
(AWG 10)
1.6KW
2.4KW
4.0KW
6.0KW
8.0KW
* Make sure electric polarity is correct when connecting DC terminals.
WARNING: Incorrect electric polar connection will damage the PIP-LC!
* Whenever a PV array is exposed to sunlight, it converts sunlight into electric power and
results in shock hazard at its output wires and terminals. To avoid the risk of shock, DO NOT leave
open wires unattended and cover the array with an opaque material before wiring connections.
- Solar Connector
*Solar connector is affixed 2 cables with Tyco terminals compatible with output terminals of a
module’s junction box.