User manual

10
B
BB
B-
--
-2 MOUNTING
2 MOUNTING2 MOUNTING
2 MOUNTING
1. Make sure a wall surface or a solid place can support the PIP-LC.
2. Mark the bracket hole positions of the PIP-LC on the wall.
3. Use a screw driver to fix the PIP-LC
4. If more holes are required to be drilled on the bracket, make sure no metal shavings are left inside
the PIP-LC. It could result in a short circuit when PIP-LC is operating.
Hole Diameter 800W~2400W 4000W~8000W
Upper Hole 9.5mm 15mm
Lower Hole 7mm 10mm