User manual

9
B
BB
B-
--
-1
11
1-
--
-2 Transporting
2 Transporting2 Transporting
2 Transporting
1. Disconnect all power cables if necessary.
2. Be careful not to drop/damage the PIP-LC while transporting.
3. Don‘t move the PIP-LC upside down.
4. Please transport the PIP-LC system only in the original packaging (to protect against shock and
impact).
B
BB
B-
--
-1
11
1-
--
-3 Installation
3 Installation 3 Installation
3 Installation
1.
Connect the PIP-LC system only to a grounded shockproof wiring system to avoid electric
shocks resulting from current leakage.
2. Place cables in such a way that no one can step or trip over them.
3. Keep wire lengths between the array and the PIP-LC as short as possible to minimize voltage losses.
4. The installation must be performed by qualified personnel.
B
BB
B-
--
-1
11
1-
--
-4 Operation
4 Operation 4 Operation
4 Operation
1. Do not disconnect the main cable on the PIP-LC system or the building wiring socket outlet
during operation. This would cancel the protective grounding of the PIP-LC system and of all connected
loads.
2. The PIP-LC has its own internal power source (capacitors). The output terminals may be live even when
the PIP-LC is not connected to the AC supply.
3. Ensure that no fluids or other foreign objects enter the PIP-LC system.
4. Disconnect input power in rear panel if you will not use it for long period. If the PIP-LC is stored over 3
months, please supply power to the PIP-LC for at least 24 hours to ensure battery fully recharged.
5. Do not wear any jewelry or metallic objects when working with battery bank.
B
BB
B-
--
-1
11
1-
--
-5 Maintenance and Service
5 Maintenance and Service 5 Maintenance and Service
5 Maintenance and Service
1. Caution - risk of electric shock.
Even after the unit is disconnected from the main power supply (building wiring socket outlet),
components inside the PIP-LC system are still connected to the battery and are still electrically live and
dangerous. Before carrying out any kind of servicing and/or maintenance, disconnect the batteries and
verify that no current is present.
2. Batteries may cause electric shock and have a high short-circuit current.
Please take the precautionary measures specified below and any other measures necessary when
working with batteries:
- remove wristwatches, rings and other metal objects
- use only tools with insulated grips and handles.