Instruction Manual

4
5
6
7
3
2
1
Shine
• Press power button to turn unit on.
• 1 click for low mode, 2 clicks for medium, 3
clicks for high, 4 clicks for flashing, 5 clicks
to turn off, or hold for 2 seconds at any time
to turn off.
Inflate
• Firmly pinch the 2-way valve and pull away
from base. This will do 50% of the inflating.
• Firmly pinch valve and blow into the nozzle
until fully inflated. Push in the valve, and
you’re all set!
Deflate
• Pull out the valve, firmly pinch valve and
simultaneously collapse towards the base.
• Gently twist the light as you deflate for a
flatter, more compact shape.
• Close tab on valve when fully deflated.
How to use
Power button
Battery level indicator
• 1 light = 0-10%
• 2 lights = 11-55%
• 3 lights = 56-100%
Battery level indicator button
Solar panel
Adjustable base strap
Fixed top strap
2-way valve
1
1.
2.
3.
4.
5.
6.
7.
Getting to know Luci
Charging
Charge via solar
• With solar panel side up, place in direct
sunlight for up to 7 hours for a full charge.
• Press battery level indicator button at any
time to check battery level. See illustration
above for more info.
Direct sunlight means that the sun’s
light is directly hitting the solar panel.
For example, if you were standing
outside under the sun with nothing
obstructing you and the sun, then you
would be in direct sunlight. If you were
standing inside, you would be getting
indirect sunlight but no direct rays from
the sun. Solar panels always need direct
sunlight to charge. If in doubt, think
of it this way; if you were Luci and you
were able to directly see the sun, then
you would be in direct sunlight!