Instruction Manual

Charging
String up and shine
• Press power button to turn unit on.
• 1 click for external flashlight, 2 clicks for
low mode, 3 clicks for medium, 4 clicks
for high, 5 clicks to turn off, or hold for 2
seconds at any time to turn off.
Charge via solar
• With solar panel side up, place in direct
sunlight for up to 14 hours for a full charge.
• Press battery level indicator button at any
time to check battery level. See illustration
above for more info.
Twist
• Holding the top and bottom of the unit
with each hand, twist to open and reveal
string lights.
Unravel and string up
• Locate the USB at the end of the string and
unravel to desired length.
• Once unraveled, thread string through the
opening notch, and close unit.
• To string up, simply wrap the end of the
string around something and affix the hook
clip to secure.
How to use
1
Getting to know Luci
1
3
4
5
9
8
6
7
Power button
Battery level indicator
• 1 light = 0-20%
• 2 lights = 21-40%
• 3 lights = 41-60%
• 4 lights = 61-100%
Battery level indicator button
Nylon-braided cord
Nodes
External flashlight
Solar panel
Built-in USB port
Hook clip
1.
2.
3.
4.
5.
6.
7.
8.
9.
2
Charge via USB
• Insert the micro-USB cord provided into
the port on unit, and then insert the other
end into a USB outlet for 2-3 hours.
• Ensure the cord is firmly in position and
check that the Battery Level Indicator lights
are flashing - this means it's charging.
Charging devices
• Simply insert your charging cable at the
USB-A end into the USB port on the light,
and then plug the other end of the cable
into your device. Power up!