Operation Manual

Version1.0 Page 28
Afterwards, the path in which the video files are stored will be displayed in the
“output file” column of the conversion tool interface.
3) Properties setting
Before converting AV files, some important parameters of the video files need
to be set, such as the type (AVI or WMV), the intercepted part and the length of
the video file, image exchange, image quality. There are two methods to enter
the properties setting interface:
A. After selecting one or more AV files, click the settings button in the
“output information” column to enter;
B. After selecting one or more AV files, right click the mouse and select
“settings” to enter;
“Select” here does not mean checking the AV file in the check box, but using
the mouse to click file name to make the file background color blue.
4) Start converting file
Confirm that the check box of the AV file to be converted is checked. Press the
conversion button in the tool interface to start, the tool begins to
convert all selected AV files of which the check box has been checked, and the
file status will be changed from “not processed” into “being converted”, and the
conversion progress bar will be displayed in the conversion progress column at
the same time.
In addition to the above file conversion methods, the AV files stored in the hard
disk may also be selected and converted by right clicking the mouse and
selecting the “start video conversion” in the pop-out menu, and the tool will
automatically run and directly start file conversion.