Instruction manual

6
MEMORY OPERATION
37
■ Frequency transferring
The frequency and operating mode in a memory chan-
nel can be transferred to the VFO.
Frequency transferring can be performed in either VFO
mode or memory mode.
D Transferring in VFO mode
This is useful for transferring programmed contents to
VFO.
q Select VFO mode with [V/M].
w Push [CH], then select the memory channel to be
transferred with [UP Y] or [Z DN].
•“BLANK” appears if the selected memory channel is a
blank channel.
e Push [M≈V] for 1 sec. to transfer the frequency
and operating mode.
• Transferred frequency and operating mode appear on
the frequency readout.
r Push [CH] to exit memory channel select mode.
TRANSFERRING EXAMPLE IN VFO MODE
Operating frequency : 21.320 MHz/USB (VFO)
Contents of M-ch 12 : 14.180 MHz/CW
UP
DN
or
CH
Push for 1 sec.
Beep
Beep
Beep
M ≈ V
6
CH
√∫
IC-718.qxd 02.9.6 14:29 Page 37