Instruction Manual

9
 At the bottom right hand corner of the PC, a symbol will appear. This means
that your DAB player is now connected and ready to use.
(Note that when it is in connected mode, any key operation takes no effect)
 Then simply go into [MY COMPUTER] and you should see the new device listed as
a removable disk.
 After you have transferred data between your DAB player and PC, click “Safely
Remove Hardware “to exit.
 The screen shows “Build Playlist”.
 Then the DAB player enters main menu. Now in this mode key operation takes
effect. Press < > to turn off the DAB player and then it enter s charging mode.
After complete charging pull out the USB cable to stop charging from your PC.
(Note that in this USB charging mode you can not turn on your DAB player)
(2) USB Charging
 Press <
> to enter USB charging mode.
 The DAB player enters main menu directly.
Key operation takes effect. Press <
> to turn off the DAB player and then it
enter s charging mode. After complete charging pull out the USB cable to stop
charging from your PC.
(Note that in this USB charging mode you can not turn on your DAB player)
(3) MTP
 Press <
> to enter MTP operation.
 The DAB player shows “USB Connected” interface
 At the bottom right hand corner of the PC, a
Symbol will appear. This means that your DAB player is now connected and ready
for synchronization operation.