Quick Start Guide
Page 10  Getting To Know The Internet Tablet
English
The tablet comes with a built-in rechargeable lithium-
polymer battery.
Before using the tablet, the battery should be charged 
fully. The Status Indicator will light blue when the battery 
is charged fully.
To charge the battery:
1.  Plug one end of the included power adapter into an 
AC 100-240V outlet.
2.  Plug the other end of the included power adapter into 
the Power jack on the tablet.
3.  Disconnect the power adapter when the tablet is fully 
charged.
 Thebatteryusedinthisdevicemaypresenta
re or chemical burn if mistreated. Do not
disassemble,incinerate,orheatthedevice.Do
notleavethede-viceinaplacesubjecttodirect
sunlight,orinacarwithitswindowsclosed.Do
notconnectthedevicetoapowersourceother
thanthatwhichisindicatedhereoronthelabel
asthismayresultintheriskofreorelectric
shock.
The tablet accepts microSD memory cards. Insert a 
memory card into the microSD card slot to:
  Increase the memory capacity of your tablet
  Play media les stored on the memory card (e.g., 
music, video, or photo les).
To insert a memory card:
1.  Align the memory card with the card slot. The metal 
contacts of the memory card should face down away 
from the LCD screen.
2.  Slide the card into the spring-loaded slot. Push the 
card in until it clicks into place.
 Do not attempt to insert objects other than a
microSD memory card into the card slot. A
compatiblememory cardshould teasilyinto
thecardslot;ifyouencounterresistance,check
the alignment of the card. Do not attempt to
forcethecardin.
 Avoidtouchingthegoldcontactsofthememory
card.










