User's Guide

34
+ FACTORY RESET
You can erase all data on device.
1. Select Privacy
2. Tap the Factory data reset
3. The device will restart
Note:
• Turning on MP710 after factory reset : When you turn on MP710 after factory reset, it will show the
Calibration screen. This is to calibrate the touch screen to have accurate touch. Carefully press and hold
on the center of the target (+). Repeat as the target moves around the screen. If calibration is not
working properly, press the Previous or Home button to cancel and go to the Home screen. You can
always calibrate the screen later
• All data stored in the system memory will be erased. So please back up all the data before you
perform Factory reset.