MP-CS100 www.mpmaneurope.com Table of Contents 1. 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 2. 3. 4. 4.1 4.2 4.3 4.4 5. 6. 7. 8. 8.1. 8.2. 8.3. 8.4. 8.5. 8.6 8.7 9. 10. 11.
12. Upgrade 13. Notice 14. MP-CS100 Utility 14.1 install 14.2 AMV Convert Tool 14.3 AMV Player 14.4 MP3 Player Update Tool 14.5 Sound Convert Tool 14.6 Uninstall - 2- Downloaded from www.Manualslib.
1 Overview 96x64 full-color MP3 Player adopts the ATJ2085 standard solution. In addition to the four functions of playing MP3/WMA files, digital recording, USB Disk storage, E-book, the player also has the added ability of playing AMV movie files (A special software is required to perform necessary conversions.), as well as the added function of viewing pictures. The common functions of the product: z Playing of musical files and recorded files stored in up to 99 subdirectories of the same level directory.
z z z z Powerful expandability, online firmware upgrading Convenient language learning features, a true digital repeating device, segment A-B repeating, follow speaking by contrasting with original sound, 16-level variable-speed playback. For Windows ME/2000/XP, no drivers are needed. For Windows 98, you should install its driver. Lithium Battery 1.
1.4 Recording Function of the A-B Button Except the recorded file playback and musical file playback interface, repeat interface, upgrading interface and U Disk interface, the A-B button functions as a hot recording button in all other interfaces. A short-press of the A-B button will take you to the recording interface and start recording. 1.
z z z z z z z The slide block can be moved to left or right. The number “6” in the Fig is the figure that corresponds to the position of the slide block. Button Function in the Slide Bar Interface A short-press or long-press of NEXT will move the slide block a step to right. The corresponding number will be displayed step by step till the max number. A short-press or long-press of LAST will move the enabled position a step to left.
2 Main Menu There are 8 functions available: music, recorder, voice, radio, pic, settings, video and e-book. 2.1.1 The interface is as shown in the Fig below. Each round icon stands for a mode. You can only enter the mode represented by the one that is located in the center and has colors. 2.1.2 Button Function in the Main Interface z A short-press or long-press of NEXT will cycle the selection position to right.
1 2 3 4 5 6 7 z ① 8 9 B indicates that the current musical file is in the WMA format with a bit rate of 64Kbit. represents that the current cycle mode is Repeat 1. z ② z ③ indicates that the current EQ is Classic. z ④ shows that the current playback position is at 00:03 and the total playback time show that the folder name z ⑤ z ⑥ scroll that the ID3 tag l z ⑦ indicates that the current musical file is the first one and the total number of the musical files is 15.
z Short-Press of EQ: Switch the sound effects. 4.1.2 The Stop Menu Interface Note: You can select Local folder, Delete, Repeat and Exit. When you enter into this interface, the enabled position is the one where you quit last time. The interface is as shown in the Fig below. z z The strip indicates the enabled icon. “Delete”: This is the name of the current enabled option. 4.1.
z z z z z z Short-Press or Long-Press of “Vol-”: The selection strip switches to the next directory one by one. The selection strip scrolls in a way of two lines. Short-Press or Long-Press of “Vol+”: The selection strip switches to the last directory one by one. The selection strip scrolls in a way of two lines. A short-press of MODE will select the directory and return to the Stop interface.
4.2.3 Playing Menu Interface Note: This interface provides the user with the following options: ① Repeat: To set the ways for playing songs. ② Equalizer: To set sound effects for the playing songs. ③ Tempo rate: To adjust the speed of song playing, except for the songs in the WMA format. ④ Replay: To enter the Repeat interface and start the Repeat function. ⑤ Replay Times: To set the times for repeating. ⑥ Replay gap: To set the interval between each repeating playing.
Play Folder: The player will stop if it finishes playing the songs in the current directory. Repeat Folder: Repeat playing the songs in the directory. Repeat All: Repeat playing the songs in all directories. Random: Play the songs in the current directory in a random way. Pre-listen: Play the beginning 10 seconds of all the songs in the current directory in order. 4.2.5 Equalizer Setting Interface Note: You can select Equalizer for playing songs in here. The music is still playing.
The A short-press of NEXT will enter the cycle of Repeat-> Compare. Compare function refers to play the sound recorded in the Follow function. A short-press of LAST will return to Follow-Repeat. A short-press of NEXT will begin the settings for the next Repeat. Note: ① In the steps above, hold-on of “Vol+” or “Vol-” will change the current playing speed. (Except for the WMA format) ② In all the steps above, a short-press of MODE will quit the Repeat interface and return to the Playing interface.
4.2.7 Tempo rate Setting Interface Note: You can set the current playing speed in here. This will affect the playing of musical files in the MP3 format. However, this will not affect the files in WMA format. The interface is as shown in the Fig below. The standard slide bar function. Auto quit for idling for 5 seconds. 4.2.8 Replay times Note: The player will quit the Repeat mode after the set replay times.
Interface Display English Songs: The screen is split into an upper part and a lower part. Generally, a line in the LRC corresponds to a part. If a line in the LRC has more than 28 characters, the rest characters in the line will be displayed in the other part. For each part, the sync time tag is calculated by averaging.
the following interfaces: Stop, Recording, Pause and Directory Selection. 5.1 The General Interface of the Recorder z 00:00:03 indicates the progress of the recording. In the Stop interface the length of the current recording will be displayed. z 05:05:17 indicates the space available for recording sound. z indicates the coding format of the current recorded file, including AG8 and AD32. z 01-15, the “01” will not change.
z Short-Press or Long-Press of “Vol+”: The selection strip switches to the last directory one by one. The selection strip scrolls in a way of two lines. z A short-press of MODE will confirm the selection strip and return to the Stop interface. z A short-press of PLAY will cancel Directory Selection and quit to the Recording Stop Interface. z A long-press of PLAY will turn the player off. z A short-press of A-B will enter into the recording function.
user’s operations are wanted. In this case, 00:00:03 will flash at the rate of once per second. Button Function in the Pause Interface : z Short-Press of PLAY/A-B: To return to the Recording interface to resume recording. z Long-Press of PLAY/A-B: To return to the Stop interface and save the recording in the file system. z LAST, NEXT, Vol+ and Vol-: Disabled. 5.4.1 Stop recording when the electronic signal level is too low.
z Short-Press of LAST: To switch to the last recorded file in the current directory and reset the time point to zero. z Long-Press of LAST: To cycle to the last recorded files and reset the time point to zero. z Short-Press of NEXT: To switch to the next recorded file in the current directory and reset the time point to zero. z Long-Press of NEXT: To cycle to the next recorded files and reset the time point to zero. z Short-Press of A-B: To switch to the recording mode and start recording. 6.1.
6.1.3 Delete Interface Note: This interface is used for deleting files. Interface Display Deletion Confirmation Interface: It is the same as the Musical File Deletion except that the files are changed to recorded files. Button Functions in the Deleting Interface (Refer to the deletion of musical files) z Short-Press of MODE: To confirm the current selection and return to the Stop interface. z Short-Press of PLAY: To cancel the current selection and return to the Stop interface.
6.2.1 Playing Menu Interface Note: This interface provides the user with various options, including Repeat Mode, Tempo rate, Replay and Exit, while the recorded file is still playing. Interface Display It is the same as the submenu of Musical File Playback except that it does not have the EQ options. Button Function in the Playing Menu Interface : z Short-Press Function of the Standard Menu z Quit for idling for 5 seconds 6.2.
③ In all the steps above, a short-press of PLAY will quit the Repeat interface and the Playing interface, and return to the Stop interface. 6.2.4 Tempo Rate Setting Interface Note: Here, you can set the current playing speed, which will affect both WAV and AG8 files. The interface is as shown in the Fig below. Button Function in the Tempo Rate Setting Interface z The standard slide bar function.
z A long-press of Mode will return to the main menu. z Other buttons are disabled. 8 Settings Note: This is mainly used for the setting of system-related parameter and status display. These settings include: Clock, LCD Set, Language, Power off, Replay Mode, Memory Info, Firmware Version, Firmware Upgrade and Exit Menu. Interface Display Button Function z Standard Menu Function. z After you finish setting each of these functional interfaces, you will still be returned to this interface. 8.
Month (1 -12) Date(1 -31). Each month has a different number of days. Hour(0 - 23) Minute(0 - 59) 8.2 LCD Set Interface Display Button Function ◆ A short-press of “Vol-“ or “Vol+” will switch among different options. ◆ A short-press of MODE will select and enter one of the options. ◆ After you enter the option, a short-press of LAST or NEXT will adjust the position of the slide bar. ◆ A short-press of PLAY will cancel the setting and quit. 8.3 Language Note: Selecting Languages.
It is the same as the Tempo Rate Setting interface. Button Function Standard Slide Bar Function. 8.4.2 Sleep time Note: In this mode, you can set a time. When there is no operation, the system will count down from this setting time. When the setting time is over, the player will be turned off. This time will be reset to zero before turning off the player. (This setting is only valid for once.) It is mainly used for enjoying music before sleeping. The Range: 00’--120’.
9. VIDEO The *.AMV files could be playback in this function(the *.AMV files can be converted by using the software which is in the CD). Button Function z Short-Press of MODE: Enter into the Playing menu interface. z Long-Press of MODE: Stop playing the AMV files and enter the main menu. z Short-Press of PLAY: Play or stop. z Long-Press of NEXT: Function as fast forward till the end of a AMV file. z Long-Press of LAST: Function as fast backward till the beginning of a AMV file.
A short–press of Play will return to the File Selection status. Long-Press of MODE: To enter into the main menu. Other buttons are disabled. 11 USB DISK Realize the standard USB DISK functions. Except the UPGRADE module, in other status, when inserted into the USB Port, the player will enter into the Udisk function. a) Interface Display z There are three status: Ready, Download and Upload. Ready means that the UDISK is ready to use.
z P C B M u D i s k : UPGRADE is upgrading the firmware of the system by downloading. PCAMuDisk: Backing up of the firmware of the system by uploading. z The current executing status can be: Ready/Busy…doing…/done/failed. Ready: UPGRADE is ready for receiving the requests from PC. Busy: UPGRADE has not begun the material upgrade or backup yet, but is processing the requests from PC. Doing: UPGRADE is upgrading or backing up materially, so users can’t cancel the upgrade at this time.
Operation Instructions Don’t respond to button operations. PC requests processing. It takes about 15 seconds to finish the Download Upgrade. After finishing the Download Upgrade, the player will switch to the Done status. 1 second later, the system will restart to complete the upgrade. Abnormity Disposal If the communication fails during the Download Upgrade, set the retry times to restore the communications. When suspend occurs during the Download Upgrade, “Fail” should be displayed.
* Select the route and click the button “next” to get into the next interface： * Click the button “next” and begin the installation, rate of progress as indicated below: * There will be a pop-up information as followed after the completion of installation - 30 - Downloaded from www.Manualslib.
Click the button “next” and get into the next interface： * Click the button “close” to finish the final installation. * You will find the installed progress as indicated below from the “progress” in “start” menu.
14.2 AMV Convert Tool * Select “AMV Convert Tool” to enter the next interface: * Click the button ① to select the file which needs to be converted, click the button ② to select the location of converted file with .
* When the progressing-bar indicates 100% completion, it will show as followed: * Click the button “YES” to finish the converting and you will find the converted file with .AMV format according to your selected route, copy this file to the MP3 and enter the “Video” interface to find and play it by using the 5-direction Key 14.3 AMV Player Select “AMV Player”: The converted file with .AMV format can be played by PC - 33 - Downloaded from www.Manualslib.
14.4 MP3 Player Update Tool This tool is used for upgrading of firmware * MP3 Player firmware upgrading tool is used for upgrading a new firmware or recovering damaged firmware for MP3 Player. Following are the steps. * First, make sure connect MP3 Player with computer’s USB port normally, and no other removable disk connecting to this computer’s USB port. * Second, run this tool. If MP3 Player’s internal firmware working normally, it switched to upgrading mode.
* If upgrading or recovering successfully, the tool will show "Upgrade is success, the program will exit". Click OK button, the tool will closed automatically, and all upgrading or recovering done. * ATTENTION, DON’T DISCONNECT MP3 PLAYER DURING UPGRADING OR RECOVERING. 14.5 Sound Convert Tool * The tool is designed for format conversion from rcd/rec/act to WAV for recording files , with the function of files playback in WAV, MP3 format files included.
RESET FUNCTION If for any reason your player is blocked and cannot operate anymore, you have the possibility to reset the internal firmware. You just have to switch it off and then on, Reset is automatic at startup. For more information you can visit our website www.mpmaneurope.com - 36 - Downloaded from www.Manualslib.
