OPERATION Installation Guide Please select an OSD language English Italiano French Português Deutsch Nederlands OK 1).Press the buttons to navigate the menu and change the settings. Press the OK button to confirm. 3). Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found. Select your desired language to be displayed on the menu. 2).
OPERATION
OPERATION 6). Channel tuning will commence. This operation may take up to 6 minutes. The display will show the progress of the tuning and the number of channels found. 7). If you want to skip the ATV tuning, press the MENU button to interrupt the tuning half way. A pop-up screen will be displayed, press the button to select YES to confirm. You will then go straight to DTV tuning. You may repeat the above step if you also want to skip the DTV tuning.
OPERATION 3.1 ATV Manual tuning : Favourite You can change the sound system to search the analog TV channels and fine tune the channels , then storage the channels you selected. Press to choose the program , press FAV button , it will show on the right side of the program.Choose the FAV program , press FAV button again , you can cancel the FAV, the will disappear .
OPERATION Note: Auto volume: only available when the input signal volume is too large or distortion. Lock System Set Password Block Program < 4.TIME MENU LOCK Parental Guidance Off > The fourth item of the menu is the TIME MENU You can adjust the clock, power on/off time, sleep time etc Press to move, press OK to adjust. < Clock -- -- -Off Time On Time Sleep Timer Auto Standby Time Zone TIME NOTE: The default pass word is 6666.
LEDTV390
