LED TV USER MANUAL TV237 Please read this User Manual carefully to ensure use of this product and keep this manual for future reference
Contents Safety and warnings..............................................................2-3 Introduction.............................................................................4 Base Stand Assembly Instruction..............................................5 WALL MOUNTING INSTALLATION GUIDELINES..................................5 Installation...........................................................................6-9 Remote Control.................................................................
SAFETY AND WARNINGS IMPORTANT SAFETY INSTRUCTION 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, install in accordance with the instructions. 8) Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
WARNINGS AND CAUTIONS Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Caution Do not trap the power supply cord under the television receiver. Warning To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. Warning Do not drop or push objects into the television cabinet slots or openings.
INTRODUCTION Thank you very much for purchasing this TV. To enjoy your product from the very beginning, read this manual carefully and keep it handy for easy reference. INSTALLATION *Locate the TV in the room where light does not strike the screen directly. *Total darkness or a reflection on the picture screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing. *Allow enough space between the TV and the wall to permit ventilation.
INSTALLATION KEYBOARD Front panel SOURCE MENU CH+ CHVOL+ 3 VOLSTANDBY 1 2 1 2 3 1: 2: 3: Remote Control Sensor. Indicator LED: BLUE POWER ON. RED STANDBY. Side buttons 4 5. REAR AV Connections SOURCE Display the input source menu.In MENU mode,press SOURCE to confirm the selected item. MENU Display main MENU. CH+/CHIn TV mode press CH+ or CHto change the channel up and down. In MENU mode, press CH+ or CH- to select items . VOL+/VOLAdjust sound level.
INSTALLATION NOTE: PC V.Freq.(Hz) not more than 60Hz.
INSTALLATION AV EQUIPMENT This TV provides one group of AV, one group of YPbPr and one SCART for convenient connection to VCR, DVD or other video equipment. Please refer to the owners manual of the equipment to be connected as well. You can use the input terminals on TV set rear as follows.
REMOTE CONTROL REMOTE CONTROL 1 16 2 17 3 18 4 19 5 20 6 21 7 22 8 23 9 10 11 12 13 14 15
REMOTE CONTROL TELETEXT Press: TEXT E Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language(cable networks, satellite channels, etc.) You will obtain: This is used to call or exit teletext modes. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number.
OPERATION Installation Guide Channel Tuning TV : 0 Programme(s) DTV : 0 Programme(s) Radio : 0 Programme(s) Data: 0 Programme(s) Please select an OSD Language Cesky English Dansk Espanol Hrvatski Nederlands Portugues Fran ais Magyar Deutsch E Italiano ~ ka Polski 30% Pycck Norsk UHF CH 45 DTV OK NOTE: All the channels including ATV, DTV and Radio can be tuning by one time, if the Tune Type is DTV+ATV.
OPERATION NOTE: Picture Mode Standard Press red button to storage to channels after manual tuning. Color Temperature Aspect Ratio 4). Program edit: You can Delete, Rename, Move, Skip, FAV any programs. < Delete PICTURE Picture Mode Press teletext red button, the program in cursor will delete. Standard Noise Reduction Screen > Color Temperature Contrast 82 Red 40 Brightness 50 Green 31 Color 50 Blue 50 Medium Sharpness 50 Rename: Tint 50 Only can rename ATV programs.
OPERATION 5.OPTION MENU 7.EPG Menu (Electronic Program Guide). The fifth item of the MENU is the OPTION MENU. You can adjust the Menu language, Audio language, Subtitle language etc. < OPTION OSD Language English Audio Languages UK Subtitle Languages UK Country UK Restore Factory Default The EPG menu is used to look at what is being broadcasted on DTV or Radio channel in the day.
OPERATION 10. USB Player 00:00:33/00:04:22 Press source key, and selsct USB in soure list, press OK button to enter the USB menu. Pause FF Prev. Next Stop MUSIC MOVIE TEXT Sample1.ts Resolution: 720x576 Please make sure that the USB device have plugged in the slot. There are four type media item can be selected, such as photo, music, Movie, and text. Select the type media item by pressing , press OK button to enter the disk selection menu.
