Specifications

ES/OL
Evaluator Series On-Line™
Storage Systems
Product Analysis
May, 2011
Page 2 of 30
Analysis of Fujitsu ETERNUS DX400 S2
Models DX410 and DX440
© 2007-2011 Evaluator Group, Inc. All rights reserved. Reproduction of this publication in any form without prior written permission is prohibited.
7720 E. Belleview Avenue • Suite 210 • Greenwood Village, CO 80111 • [phone] • Fax [phone] • www.evaluatorgroup.com
OVERVIEW
There are two models of the ETERNUS DX400 S2 that vary in capacity, performance, and connectivity.
Heterogeneous server attachment is supported (individual server operating system support is listed in the
Connectivity section of this document).
The ETERNUS DX400 S2 is part of the ETERNUS product line featuring the entry level ETERNUS
DX60/80/90, and the high-end ETERNUS DX8000, that also provides mainframe connectivity in the Japanese
market.
As seen below in Figure 1 that depicts the two models, either system may be rack mounted or configured in
Fujitsu racks. Additionally, a minimum configuration consists of the one controller enclosure containing two
controller modules, along with one or more disk tray enclosures.
Figure 1: ETERNUS DX400 S2 Product Line—Model DX410 S2, Model DX440 S2
DX410 S2
DX440 S2