Instructions / Assembly

PS6616AG

22IN DIA BALL FOUNTAIN-AGED GRANITE

ASSEMBLY INSTRUCTION

Warning! Do not plug the pump prior to assembly. Once assembled fill with water before

plugging in adaptor.

Step 1

Insert tube on ball through hole on base. Turn ball clockwise to lock.

Step 2

Connect pump wire to adaptor wire. Fill with water up to level shown below before plugging in adaptor.

Pump wire

Adaptor

wire

Adaptor

Water up to this level

PAGE 1
PS6616AG 22IN DIA BALL FOUNTAIN-AGED GRANITE ASSEMBLY INSTRUCTION Warning! Do not plug the pump prior to assembly. Once assembled fill with water before plugging in adaptor. Step 1 Insert tube on ball through hole on base. Turn ball clockwise to lock. Step 2 Connect pump wire to adaptor wire. Fill with water up to level shown below before plugging in adaptor.
PAGE 2
WARNINGS AND CAUTIONS WARNING    To reduce risk of Electric shock, connect only to a properly grounded outlet. Do not exceed voltage shown on pump. To reduce risk of Electric shock, never submerge transformer under water. CAUTION   Always disconnect from Electrical outlet before handling the pump. Pump must be completely submerged for proper operation and cooling.