User manual

REMOTE OPERATION
~51~
Function Description
Motion Buzzer / Alarm Buzzer /
Video Loss Buzzer / Key Input
Buzzer
Check one of these 4 options, and you will hear the beep sound when any movement
is detected / the alarm is triggered / video loss occurs / any DVR key is pressed.
Notified by Select the notification method when any event occurs: Email or FTP.
Duration Set the alert and buzzers to beep for 5 / 10 / 20 / 40 seconds.
 Display
In “Display”, you can choose whether to display some text indication or icons, set the channel display
switch time-out, set the DVR time remotely, and select the date format (Y-M-D / M-D-Y / D-M-Y).
Function Description
Title Select to display the channel title in the live view.
Event Select to display the event symbol in the live view.
Quick Status Select to display the quick status in the live view.
Full Sequence Duration /
Quad Sequence Duration
Set the time-out in seconds (3 / 5 / 10 / 15) after which the channel display will be switched
by one channel (Full Sequence Duration) / by 4 channels (Quad Sequence Duration)..
Server Time Set the DVR time remotely.
Date Format Choose the date display format appropriate to your location (Y-M-D, M-D-Y and D-M-Y).


T
T
o
o
o
o
l
l
s
s
Click “ ” to upgrade the firmware version, multilingual OSD and boot display of your DVR (Update Server).
Note: You need to be a supervisor to operate this function. For details, please see “Account” at page 43.
 Update Server
3 update options are available for this function: Firmware, Language and Logo.
Before performing any update, finish the following settings first:
1) Choose the IP address of the DVR whose firmware needs to be updated from the drop-down list, or
click “Search” to find.
2) Key in the user name, password and port number used to access your DVR remotely.
3) Select the update option (Firmware / Language / Logo) you want. For details, please see the
description below.