User manual

REMOTE OPERATION
~48~
In “Dvr”, you can see the following items:
Function Description
System Type Display the current system type (NTSC / PAL). It’s automatically detected.
De-interlace Select to enable or disable the de-interlace function (ON / OFF).
Daylight Saving
Specify whether to use daylight saving time (ON / OFF).
If this function is enabled, set the time period (START / END), and adjust the daylight saving time in hours
(ADJUST).
Menu Operation
Select the time-out in seconds after which the DVR keys will be automatically locked when no one is
operating the DVR for a period of time (0 / 30 / 60 / 120). The default value is 30.
Serial Port Type
Display the serial type (RS485) used by this DVR. It’s automatically detected.
Baud Rate
Set the baud rate of the DVR (2400 / 9600 / 19200 / 38400 / 57600).
 Camera
In “Dvr” → “Camera”, you can specify a channel to enable the recording function by selecting the check
box “Record”, choose to activate the “Covert Recording” function by selecting the check box “Cover”, and
rename the channel title which will be displayed in the live view screen by double-clicking the channel
title.
 Detection
Select the desired channel, and click “Edit” to enter the motion detection sensitivity and area-setting page.