User manual

REMOTE OPERATION
~43~
In “General”, you will see the following items:
Item Description
Firmware Version Display the current firmware version of your DVR.
MAC Address Display the MAC address.
Turbo Step Speed up the menu selection under the AP from 1 to 10.
Ex: If the value of the turbo step is set to 5, one mouse-click will function as 5 mouse-clicks when you click
one of the buttons
/ / / in the DVR control panel.
Title Provide a title for this DVR. Only 15 characters are allowed.
 Logs
Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “General” → “Log” to go into the
“Log” page. In the “Log” page, you can see all the logs for the network camera, such as “Power On”,
“Reset Default”, “Net Login” and “SNTP Update” … etc.
‧To refresh the logs, click “Reload”.
‧To view the earlier or later logs that are not shown in the current page, click “Prev. Page” or “Next Page”.
‧To clear all the logs, click “Clean”.
 Account
In “General” → “Account”, you can create a new account for login, or delete or modify the existing
account setting.
‧ To add an account, click “New”, and fill in the following columns. Then, click “Apply” to save your
setting and create a new account.
Column Description
User Name Set a user name that will be used for remote login. The user name allows up to 10 characters.