User manual

REMOTE OPERATION
~39~
Choose the desired channel from the drop-down list, and click and drag the slider to make adjustment.
Click “ ” to apply the change to the selected channel, or “ ” to apply to all channels.
To return to the default values, click “ ” (Default), and click “ ” to apply the change to the
selected channel, or “ ” to apply to all channels.
Note: You need to be a supervisor to operate this function. For details, please see “Account” at page 43.


B
B
a
a
c
c
k
k
u
u
p
p
Click “ ” (Backup) to go into the “Download” page, and you can select a specific time range or event to
make a video backup remotely.
Note: You need to be a supervisor to operate this function. For details, please see “Account” at page 43.
Note: Before enabling the network backup function, make sure the DVR is not in the playback mode, or
the DVR will stop playback.
NO. Function Description
1
IP Address / Port / User Name / Password Check if the network connection information of the DVR within which
contains the video data you need is correct.
2
HDD Number / Channel Specify the hard disk (HDD Number) and channel number (Channel)
within which have the video data you need.
3
Download by Time Specify the time range within which has the video data you want in the
“Start Time” and “End Time” columns.
4
Download by Event Select an event log from the event list. This list shows all logs in the
specified DVR from the latest to the earliest.
‧To quickly find the events you need, check or uncheck the event type
“System” / “Manual” / “Alarm” / “Motion”, and select the log you want.
‧To view the earlier or later logs that are not shown in the current page,
click “Prev. Page” or “Next Page”.
‧To refresh the event list, click “Reload”.