User manual

REMOTE OPERATION
~37~


(
(
A
A
d
d
d
d
r
r
e
e
s
s
s
s
B
B
o
o
o
o
k
k
)
)
Click to view the pre-defined DVR access details.
To log in, choose one IP address from the address list, and click the address twice; to log out, click the
connected IP address twice.
Tip: You can also click “ ” or “ ” in the image display section to log out (see “Image Display” at page
36).
You can also create new IP address information, or modify or remove the current IP address information.
NO. Button Function Description
1
Add
Click to directly add one IP address for login. Key in the DVR access
information needed, and click “Apply” and “Close”.
2
Edit
Select one current IP address from the address list, and click this button to
modify the DVR access information as needed.
3
Remove Select one IP address from the address list, and click this button to delete it.
REC
When the AP is connected to more than 1 device, and not all devices are necessary to enable the manual
record function, check “REC” for the connected device(s), and its manual record function will be on.
Note: When the AP is connected to more than 1 device, click “ ” will record the live views for all the
connected devices. To enable the manual record function for the specific device(s), please set
from this view.