User manual

ADVANCED MENU
~25~
1) EXT. ALERT
Select to enable or disable the sound when any external alarm is triggered (ON / OFF).
2) INT. BUZZER
Select to enable or disable the sound (ON / OFF) for all the internal buzzers: KEY BUZZER, VLOSS BUZZER,
MOTION BUZZER, ALARM BUZZER, and HDD BUZZER.
Note: When this item is set to OFF, item 3) to item 7) will be disabled even though they are set to ON.
3) KEY BUZZER
Select to enable or disable the sound when pressing the buttons on the front panel (ON / OFF).
4) VLOSS BUZZER
Select to enable or disable the sound when video loss happened (ON / OFF).
5) MOTION BUZZER
Select to enable or disable the sound when any motion alarm is triggered (ON / OFF).
6) ALARM BUZZER
Select to enable or disable the sound when any internal alarm is triggered (ON / OFF).
7) ALARM DURATION (SEC)
Press “ENTER” or “＋” / “－” button to set the duration time of alarm recording in second (5 / 10 / 20 / 40).
7.5 SYSTEM
In this menu list, you can check or change some system settings.
Move the cursor to “SYSTEM”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE SYSTEM
CAMERA SERIAL TYPE RS485
DETECTION BAUDRATE 2400
REMOTE HOST ID 0
DISPLAY PASSWORD XXXX
ALERT RESET DEFAULT RESET
SYSTEM
CLEAR HDD HDD-MASTER-1
NETWORK UPGRADE START
BACKUP AUTO KEYLOCK NEVER
HDD INFO LANGUAGE ENGLISH
EVENT LOG VIDEO FORMAT NTSC
VERSION 1160-1012-1021-1014-M3-6C1B
PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
uv SELECT s BACK t NEXT  ENTER
The submenu items are described below:
1) SERIAL TYPE
Press “UP” / “DOWN” button to set the serial type of the DVR (RS485 / RS232).
2) BAUDRATE
Press “UP” / “DOWN” button to set the baud rate of the DVR (2400 / 9600 / 19200 / 57600).
3) HOST ID
Press “UP” / “DOWN” button to set the ID of the DVR (0 ~ 255).
4) PASSWORD
Press “ENTER” to reset the password for accessing the DVR system (ADMIN PASSWORD or GUEST
PASSWORD). You can set the password up to 4 digits.