User manual

ADVANCED MENU
~21~
7. ADVANCED MENU
Press “MENU” button on the front panel to enter the main menu list. Move the cursor to “ADVANCE”, and
press ”ENTER”. The screen will show the following options.
ADVANCE
CAMERA
MENU DETECTION
QUICK SEARCH
REMOTE
RECORD
DISPLAY
TIMER
ALERT
DATE
SYSTEM
ADVANCE
NETWORK
BACKUP
HDD INFO
EVENT LOG
7.1 CAMERA
In this submenu, you can make advanced camera settings, such as changing the camera title, or adjust the
brightness. Move the cursor to “CAMERA”, and press ”ENTER”. You will see a similar screen as the following:
ADVANCE CAMERA
CAMERA
TITLE BRIG CONT SATU HUE COV REC
DETECTION CH1 110 120 128 128 NO ON
DISPLAY CH2 110 120 128 128 NO ON
REMOTE CH3 110 120 128 128 NO OFF
ALERT CH4 110 120 128 128 NO OFF
SYSTEM
NETWORK PLEASE CONSULT YOUR INSTALLER FOR ADVANCE SETTING
BACKUP uv SELECT s BACK t NEXT  ENTER
HDD INFO
EVENT LOG
The submenu items are described below:
1) TITLE
You can change the default camera naming here. The default title is the channel number.
Move the cursor to the camera title you want to change, and press “ENTER” to access the character selection screen.
Assign a new name to the camera up to six characters (letters or symbols).
2) BRIG/CONT/SATU/HUE
You can adjust the brightness/contrast/saturation/hue of each channel here. The default value of BRIG is 110, and
others are 128. The value is adjustable from 0 to 255.
3) COV.
Select if you want to mask the selected channel under recording (YES/NO). When this function is activated, the
wording “COV.” will be shown on the screen.
4) REC
Select if you want to enable recording for the selected channel (YES/NO). When this function is activated, the symbol
“ ” will be shown on the channel screen.