User manual

1) LED Indicators

The following LEDs will be on when:

• HDD (Hard Drive): HDD is reading or recording

• HDD Full: HDD is full.

• ALARM: Alarm is triggered

• TIMER: When timer recording is turned on

• PLAY: Under playing status

• REC: Under recording status

2) MENU

Press “MENU” button to enter the main menu.

3) ENTER / SET

• Press “ENTER” button to conﬁ rm the setting.

• Press “SET” to change the position of the channel display.

• Press up/down/left/right direction buttons to select the channel that you want to change.

• Press “+“ or “-“ to select the channel you would like to display.

• Channel Display Position

Under the live mode, you can switch the positions of two channels by:

• Step1: Press “Set” to highlight one channel.

• Step2: Press “UP“, “DOWN”, “LEFT”, “RIGHT” button to change the channel position.

• Step3: Press “+” or “-” to select the channel.

• Step4: Press “ENTER” button to conﬁ rm the setting.

Under the playback mode, you can select a channel to display in live video:

• Step1: Press “Set” to highlight one channel.

• Step2: Press “UP“, “DOWN”, “LEFT”, “RIGHT” button to select the channel you want to view.

• Step3: Press “+” or “-” to select the channel.

• Step4: Press “ENTER” button to conﬁ rm the setting.

4) SEARCH

Press “SEARCH” button to enter the search menu.

5) SLOW

Under the playback mode, press “SLOW” button to decrease (1/2X) speed playback.

6) ZOOM

Press “ZOOM” button to enlarge the picture area.