User manual

2. Select “NETWORK”, and press ”ENTER”.
3. NETWORK TYPE
There are 3 network types: STATIC, PPPOE and DHCP.
• STATIC
Select NETWORK TYPE, press “+” or “-” button to set the network type as STATIC, and then press “ENTER” to
enter submenu. Use “+” or “-” button to set IP, GATEWAY and NETMASK.
4. Enter your IP, Gateway and Netmask and hit the MENU key to exit STATIC menu.
ADVANCE
CAMERA
DETECTION
DISPLAY
ALERT
REMOTE
SYSTEM
NETWORK
BACKUP
HDD INFO
EVENT LOG
NETWORK
NETWORK TYPE STATIC
DNS 168. 95. 1. 1
PORT 0080
NETWORK
NETWORK TYPE STATIC
DNS 168. 95. 1. 1
PORT 0080
STATIC
IP 160 . 121 . 346 . 236
GATEWAY 160 . 121 . 346 . 236
NETMASK 255 . 255 . 255 . 254
5. In NETWORK menu select DNS and enter IP address of the domain server obtained from your ISP (Internet Service
Provider).
NETWORK
NETWORK TYPE STATIC
DNS 168. 95. 1. 1
PORT 0080
6. Select PORT and enter 8000.
6. Exit all menus by pressing the MENU key and turn your DVR off by hitting the power key and holding for about 3
seconds. Then turn your DVR back on to continue by pressing the power button.
NETWORK
NETWORK TYPE STATIC
DNS 168. 95. 1. 1
PORT 8000
NOTE: If your using other NETWORK TYPE settings like PPOE or DHCP continue on, Otherwise if your using STATIC
NETWORK TYPE continue on to TEST YOUR CONNECTION page 48.
46