User manual

1) MANUAL RECORD ENABLE

Start / stop the manual recording.

2) EVENT RECORD ENABLE

Start / stop the event recording. When enabled the recording is triggered by motion or external alarm.

3) TIMER RECORD ENABLE

Start / stop the schedule recording.

4) OVERWRITE

Select to overwrite previous recorded data for automatic continuous recording. When the HDD is full under O/W

recording, OVERWRITE will clear 8GB of data to make room for new video data.

5) RECORD IMG SIZE

Select image size: FRAME or CIF. FRAME settings is highly recommended.

Note: When changing the record image size, stop recording.

6) RECORD QUALITY

Select type of video quality: BEST, HIGH, NORMAL & BASIC.

7) MANUAL RECORD IPS

Select the number images per second to use for MANUAL RECORD.

8) EVENT RECORD IPS

Select the number images per second to use for EVENT RECORD (Recording is triggered by an alarm or motion

event).

9) TIMER RECORD IPS

Select the number images per second for TIMER RECORD (Recording is activated by a time schedule).

NOTE: IPS options:

U.S. International

NTSC PAL

FRAME 30, 15, 7, 3 FRAME 25, 12, 6, 3

CIF 120, 60, 30, 15 CIF 100, 50, 25, 12

10) TOTAL IPS SHARE/ NOT AVAILABLE FOR THIS UNIT.

Controls how IPS is shared. IPS share setting is ﬁ xed and will not change for this unit: Share options: FIX or GROUP.

FIX: IPS per channel = RECORD IPS ÷ number of channels

GROUP: (Ideal for Frame mode): IPS per channel = RECORD IPS ÷ 2 ÷ number of channels in a group under

recording.

NOTE: IPS share is “FIX”.

5.3 Timer

Press “MENU” button on the front panel to enter the main menu. Select “TIMER”, and press ”ENTER”. Use TIMER to

schedule your recordings by entering the days of the week and time.

RECORD

DATE START END

OFF 00 : 00 - 00 : 00

DAILY 08 : 00 - 18 : 00

SUN 06 : 00 - 23 : 00

MON-FRI 18 : 00 - 23 : 00

OFF 00 : 00 - 00 : 00

RECORD

TIMER

DATE

ADVANCE