User manual

3.0 Installation Guide

3.1 Camera and Monitor Installation

This manual has been carefully written to help you assemble and conﬁ gure your digital video recorder system for optimal

performance. It’s easy to setup your digital video recorder just follow the instructions on the following pages. If you have

any comments questions about this manual, please feel free to call us at 800-335-9777.

1. Remove your monitor from the box for testing your cameras and cables. You can use a TV set with a video input if you

don’t have a monitor. Plug your monitor into a 110-120 AC power source. Do not mistake the antenna input on the TV

for a VIDEO INPUT. Monitors and TV’s have video inputs clearly marked. The TV RCA input will look some what like

the image below (labeled VIDEO INPUT). This type of input connector is called an RCA female input jack.

2. Remove your cameras and camera power supplies from the box.

3. Connect each one of your cameras to your power supply and cable assembly. Most cable assemblies are 100 ft long

or more.

RCA Female Jack