Setup guide

77
Preface
Express PC Card Installation
This computer provides an Express Card slot. The new Express Card
interface is smaller and faster than PC Card interface. The Express Card
technology takes advantage of the scalable, high-bandwidth serial PCI
Express and USB 2.0 interfaces.
The following instruction provides you with a basic installation for the
Express Card, including how to install and remove it. For more
information, please refer to the manual of your Express Card.
Installing the Express Card
1. Locate the Express Card slot on your notebook. If there is the
dummy card in the slot, remove it first.
2. Insert the Express Card into the slot (usually with its label facing
up) and push it until it is firmly seated.
Removing the Express Card
1. Press the edge of the Express Card to make the card stretch out
a bit.
2. Pull the Express card out of the slot.
3. Reattach the dummy card back into the slot.