Setup guide

74
Preface
3. The Notebook may auto detect your WebCam driver and enable
the WebCam function. If there is no detection of your WebCam,
you can manually enable the WebCam by going to Start Menu
Control Panel Add Hardware to add the new device.
Connecting the Printer
If your printer has a USB interface, you can then use the USB port on the
TransPort
®
U1100 to connect a printer. Follow the instructions below to
connect a printer:
1. Turn off the TransPort
®
U1100.
2. Connect one end of the printer cable to the USB port and the
other end to the printer.
3. Connect the power cord and turn on the printer.
4. Turn on the TransPort
®
U1100 and the system will detect a new
device. Install the required driver.
For further instructions, please refer to your printer’s manual.
Connecting the External Monitor or TV
You can connect an external monitor to your Notebook through the VGA
port for a larger view with higher resolution. To connect the monitor:
1. Make sure that the TransPort
®
U1100 is turned off.
2. Plug the monitor’s D-type connector into the VGA port.
3. Connect the monitor’s power cord and turn on the monitor.