Setup guide

25
Preface
Using Your TransPort
®
U1100
Use only approved AC adapters, auto adapters, batteries, memory
modules, and other options. The TransPort
®
U1100 requires a 65W AC
adapter. An AC adapter with lower wattage will not power the system.
If you are using the TransPort
®
U1100 with the AC adapter, do not allow
anything to rest on the power cord.
Do not use the AC adapter or battery if the shell is cracked or damaged.
The TransPort
®
U1100 can be powered by an internal battery pack or by
an external AC power source, which is supplied with the TransPort
®
U1100. Using a different kind of battery pack or AC power source in your
TransPort
®
U1100 may create an explosion or fire hazard.
The TransPort
®
U1100 is equipped with a 3-wire type plug. If you are
unable to insert the plug into the outlet, contact your electrician to replace
your obsolete outlet.
If an extension cord is used with TransPort
®
U1100, the total amperage
ratings on the products plugged into the extension cord cannot exceed
the extension cord amperage rating. Also, the total of all products
plugged into the wall outlet should not exceed 15 amperage.