Setup guide

105
Preface
 The power cord set must have a minimum current capacity of
7A and a nominal voltage rating of 125 or 250 volts AC, as
required by each country's power system.
 The appliance coupler must meet the mechanical configuration
of an EN 60 320/IEC 320 Standard Sheet C13 connector, for
mating with appliance inlet on the notebook.
Optical Disk Drive Notice
Caution: This appliance contains a laser system and
is classified as a“CLASS 1 LASER PRODUCT.” To
use this model properly, read the instruction manual
carefully and keep this manual for your future
reference. In case of any trouble with this model,
p
lease contact
y
our nearest “AUTHORIZED service
station.” To prevent direct exposure to the laser
beam, do not try to open the enclosure.