User`s guide

MPC Computers 2005 © MAS001985-00
23
APPENDIX F — ACCEPTABLE LCD DEFECTS
Table 9: Acceptable LCD Panel Defects
Bright Dot Failures
(Always On)
Bright dots are tested
with full screen black
pattern (R,G,B=0,0,0)
• Maximum five red, green, or blue bright dots
(sub-pixels)
• Maximum three green dots
• Maximum one joined bright dot
• Minimum distance between two bright dots:
10 mm
Black Dot Failures
(Always Off)
Black dots are tested
with full screen white
pattern
(R,G,B=255,255,255)
• Maximum five black dots
• Maximum two joined (adjacent) black dots
• Minimum distance between two black dots:
10mm
• No defects allowed with three adjacent black
dots
Total Dot Failures
• Maximum of eight dots (including bright and
dark dot defects)
APPENDIX G — MONITOR SPECIFICATIONS
Table 10: Monitor Specifications
LCD Panel
• Type: TFT Active Matrix Color LCD
• Size: 19.0 in (48.3 cm)
• Viewable size: 19.0 in (48.3 cm)
• Pixel pitch: 0.294 mm (H) x 0.294 mm (V)
• Viewing angles: 170°(H) 170°(V) (Typical)
• Response time: 20 ms (Typical)
• Native panel resolution: 1280 x 1024
• Contrast ratio: 800:1 (Typical)
• Brightness: 250 nits (Typical)
Scan Range
• H-Frequency: 30 kHz to 83 kHz
• V-Frequency: 55 Hz to 75 Hz
Dot Clock
• 165 MHz