User`s guide

9
OPERATING INSTRUCTIONS
The following sections provide information about operating and adjusting
your monitor.
General Instructions
To turn on the monitor, do the following:
1 Check that the power supply is connected to the monitor and a
power outlet or socket.
2 Check that the video cable is connected to your computer’s video
port.
3 Locate the power button (see figure and table on page 10).
4 Press the power button. The power indicator will light up. The
monitor features a unique quick-switch system, so a picture should
appear within seconds after the monitor is turned on.
Front Panel Controls
The power button is located on the right side of the front panel of the
monitor as you are facing it. The buttons above the power button are for
adjusting the monitor’s picture and accessing the OSD. See the figure
below and the table on page 10 for the layout and names of the control
buttons.
Figure 4: Control Buttons