User`s guide

H-Position Use this function to adjust the picture’s

horizontal position.

V-Position Use this function to adjust the picture’s vertical

position.

Input Select Use this function to select analog or digital

input. When Digital is selected the following

controls will be disabled: Clock, Phase, H-

Position and V-Position. These adjustments are

not necessary with a digital source.

Language Use this function to select which language the

monitor will use to display the instructions.

Picture Scaling

Use this function to switch scaling modes on

this display. They are as follows:

• Full Mode performs anti-aliasing on the off-

native resolutions it supports while

stretching the picture horizontally and

vertically to fill the full screen. At this setting

some picture distortion may occur.

• Aspect Mode performs anti-aliasing on the

off-native resolutions it supports while

stretching the picture horizontally to fill the

width of the screen. At this setting picture

distortion should not occur but some of the

display area may not be used leaving black

bands at the top and bottom.

• Native Mode, as the name implies, displays

the picture in the actual pixel for pixel native

format. The 1024 x 768 uses exactly 1024

pixels horizontally and exactly 768 pixels

vertically and no anti-aliasing occurs. The

picture is placed in the center of the display

area. This will leave blank area bordering

the picture displayed.

Warm Color

Selecting this option sets the color to a warm

white setting. This setting has more red than the

C2 setting and is better for viewing pictures.

Cool Color

Selecting this option sets the color to a cool

white setting and is better for viewing text. This

setting has less red than the C1.

Reset

Use this function to restore factory conditions.