User`s guide

8
Video Cable
The video cable that comes with your monitor has identical connectors at
each end. To connect the video cable between the monitor and your
computer’s video port, complete the following steps:
1 Plug the video cable's 15-pin connector into the computer's video port,
taking care not to bend any pins on the connector. (See (1) in Figure 2
on page 7.)
2 Plug the other end of the video cable into the D-SUB connection on the
monitor, taking care not to bend any pins on the connector.
3 Tighten the two screws on each end of the video cable with your fingers
to secure the connection.
Caution: Over-tightening this connection can damage the monitor
cable or your computer’s video card.
Audio Cable
The audio cable that comes with your monitor has identical connectors at
each end. To connect the audio cable between the monitor and your
computer’s audio port, complete the following steps:
Caution: To avoid breaking the wires inside the cable, do not bend
the signal cable excessively.
1 Plug the audio connector into the computer's Line Out port (light green),
taking care not to bend the pin on the connector.
2 Plug the other end of the audio cable into the Line In connection on the
monitor, taking care not to bend the pin on the connector. (See (3) in
Figure 2 on page 7.)
Caution: To avoid breaking the wires inside the cable, do not bend
the signal cable excessively.