User`s guide

21
APPENDIX E — CONNECTOR PINS
15
6
10
11 15
Figure 9: 15-pin Color Display Signal Cable
Table 6: Video Cable Pin Assignments
Pin # Description Pin # Description
1 Red 9 +5V
2 Green 10 Detect Cable
3 Blue 11 NC
4 Ground 12 DDC-Serial Data
5 Ground 13 H-sync
6 R-Ground 14 V-sync
7 G-Ground 15 DDC-Serial Clock
8 B-Ground
APPENDIX F — ACCEPTABLE LCD DEFECTS
Table 7: Acceptable LCD Panel Defects
Bright Dot Failures
(Always On)
Bright dots are tested
with full screen black
pattern (R,G,B=0,0,0)
• Maximum five red, green, or blue bright
dots (sub-pixels)
• Maximum three green dots
• Maximum one joined bright dot
• Minimum distance between two bright dots:
10 mm
Black Dot Failures
(Always Off)
Black dots are tested
with full screen white
pattern
(R,G,B=255,255,255)
• Maximum five black dots
• Maximum two joined (adjacent) black dots
• Minimum distance between two black dots:
10mm
• No defects allowed with three adjacent
black dots
Total Dot Failures
• Maximum of eight dots (including bright and
dark dot defects)