Service manual

17”LCD Color Monitor MPC F1760i
8
NOTES
• Do not install the monitor in a location near heat sources such as radiators or air ducts, or in a place subject to
direct sunlight, or excessive dust or mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your
monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth
lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive
cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
3.3 Adjusting the Picture
1. Press the MENU-button to activate the OSD window.
2. Press or to button to locate the desired function.
3. Press the menu button to select the function that you want to adjust.
4. Press or to button to change the settings of the current function.
When the OSD window is active, it shows the input signal timing. The H stands for the horizontal frequency and
the Vertical frequency.
To exit and save, select the exit functions, or leave the monitor alone for 10 seconds. if you want to adjust any
other function, request steps2-4