User Manual

Battery Charging Instructions
The MOZA Slypod E has a built-in lithium battery. Fully charge the
battery before the first use to active the battery.The solid red light
indicate that the equipment is charging, and the solid blue light
indicate that the charging is complete. With universal Type-C port, the
MOZA Slypod E can be charged by phone charger or power bank.
The charging stops automatically when the battery gets full.
1. Please use the original charging cable provided in the package!
(5V 2A low-speed charging input is supported, the fast charge
protocol is not supported)
2. Please do not overcharge or over-discharge the battery.
Otherwisethe battery will be damaged;
3. Recharge and discharge the battery every 3 months to keep it
activated if it is left unused for a long time
Battery Protection
The Slypod E has under-voltage, overcurrent protection function.
Battery protection state will be triggered by abnormal conditions such
as overuse or short circuit. When the battery enters the protection
state, it stops output with a warning red color light.
Battery Charging
The Slypod E is equipped with a Type-C interface, supporting 5V2A
low-speed charging. The fast charge protocol is not supported.Users
can select the matched charger according to actual needs.
Please use the TYPE-C interface to charge the battery and do not use
external power sources such as wall outlet or car cigarette lighter to
charge the battery.
● Do not pierce the equipment with nails or other sharp objects. Do
not hammer or pedal the equipment!
● Do not hit, throw or shake the equipment!
● Do not solder the equipment terminal directly!
● Do not disassemble the equipment in any way!
● Do not put the equipment into microwave or pressure vessel!
● Do not use if the battery emits odor, heat, deformation,
discoloration, or any other abnormality; If the equipment is in use or
charging, unplug the power adapter from the device and stop
using it immediately!