SLYPOD E User Manual
Disclaimer and Warning Thank you for purchasing the MOZA Slypod E! ● This document is related to the safety use and legal rights of your equipment. Please read it carefully before the first use. ● By using this product, you are deemed to have read, understood, endorsed and accepted all the terms and content of this statement. You are solely responsible for the use of this product and the consequences thereof.
● Do not pierce the equipment with nails or other sharp objects.
MOZA Slypod E Overview Quick Release Adapter Arca-Swiss Quick Release 1/4” and 3/8” Extension Hole SLYPOD E Quick Release Screw Quick Mounting Port Main Body SLYPOD E Indicator Light Power Button Operation Button 1 Charging Port
Adapter (accessory) 1/4” to 3/8” Adapter Screw 1/4” Extension Hole Quick Mounting Port There is a 1/4" extension screw hole on the top of the adapter, and it comes with a 1/4” to 3/8” adapter screw to meet different shooting devices. Arca-Swiss Quick Release 3/8” Screw Hole 1/4” Screw Hole There is a 1/4” screw hole and a 3/8” screw hole on the body of Arca-Swiss quick release which can meet various extension needs.
Getting Started Long press for 3 seconds: Power on/off Button Operations Power Button Click once Photo taking control via the shutter cable Extend+ Device status Static Retract- Start to retract Start to extend Extend Accelerate by one gear Decelerate by one gear Retract Decelerate by one gear Accelerate by one gear Click all three buttons at the same time: reset（blinking white） Power on Long press Extend Start to extend and continue to accelerate Keep extending and continue to accelerate R
● Regular Mode Slide the red operating point from the starting point to any position, the Slypod E will move accordingly. Release the operating point, the Slypod E will stop moving. Long click Downwards or Upwards icon, the Slypod E will automatically move up or down. Click Downwards or Upwards icon again to stop the movement. Click the ‘Take photo’ icon, and Slypod E will control the camera to take a photo.
● Acceleration Mode Click Upwards and the device will move up automatically; click again and the device stops moving. Click Downwards and the device will move down automatically; click again and the device stops moving. Click ‘Take photo’, the Slypod E controls the camera to take a photo.
Click to confirm the path and set the running time. The next path can be added after confirming the path. Click Confirm and the Slypod E will run according to the setting after the countdown is over. At this point, enter the Segmentation time-lapse interface, click on the red circular area, the Slypod E can control the camera to take pictures.
● Gradient Step Time-Lapse Select the gradient Step Time-Lapse and set the travel distance, frame number, cycle setting, exposure time, interval time, FPS, increment and decrement of interval. For the first time, click to add the first group of increment or decrement of time and frame number, and click again the to add a second group(5 groups can be added at most). Click Start, the device will move according to the settled parameters.
Click to start the Gradient Step Time-lapse Click to control the camera ● Setting-Indicator Light Enter the operation interface, select Setting-Indicator Light, up to 5 kinds of indicator light colors can be set based on personal preference. Firmware Upgrade Updating the firmware of Slypod E should be done in the charging state. When in charging state, turn on the device, connect it to the App, enter the operation interface and start the firmware upgrade.
Color Definition Charging Charging completed Power on Under-voltage alarm Solid red Solid blue Solid green Low voltage alarm Solid orange Blinking red + automatic reset &shutdown (unable to power on when pressing the power button) Start/stop running switch Blinking green for 1s Calibration status Testing/operating modes switch Blinking white Blinking blue for 1s Charging Uncover the rubber sleeve over the charging port, the Type-C interface is inside.
Contacts Official Website Sina Weibo Instagram Twitter Facebook YouTube Tutorial Firmware Upgrade and Calibration YouTube QR Firmware Upgrade and Calibration WeChat QR WeChat
Shenzhen Gudsen Technology Co., Ltd Web: www.gudsen.
