User's Manual

a. After installing the camera to the gimbal, you need to use the

camera control cable to connect camera with gimbal, and then

you can control the gimbal through the MOZA Master App

b. After installing the mobile phone to the gimbal, please open the

MOZA Genie App to connect the gimbal, then you can control

the phone to take photos or videos through te gimbal.

Note: When adjusting the balance of an axis, please unlock the

motor lock of the axis first, otherwise it cannot be adjusted accurately; if

the balance is not adjusted accurately, it will cause the abnormal motor

work, motor overheat, unstable video, unavailable of certain functions,

and also shorten battery life, please make sure it is completely balanced

before turning on the gimbal.

Balancing

Connecting camera or mobile phone

a. Loosen the tilt knob, and adjust the tilt arm back and forth until the

lens is horizontally forward, then lock the knob.

b. Rotate the camera until the lens is facing up, loosen the L-Bracket

quick release plate lock knob, and adjust the L-Bracket quick

release plate back and forth until the lens is straight up (leveled),

then lock the knob.

c. Loosen the roll knob, adjust the roll arm left and right until the roll

arm remains horizontal, then lock the knob; The camera or phone

should be leveled and can be positioned in any direction (up or

down) and it stays there.

d. Hold the stabilizer horizontally and make the pan arm parallel to

the ground, then loosen the pan knob, adjust the pan arm left

and right until the pan arm remains horizontal, and then lock the

knob. Your camera or phone should be leveled and can be

move to any direction (tilt, pan, roll) and stays on that position

without hands holding it.

a b

Note: For camera functions and features, please use Moza

Master App. For Phone controls, please use Moza Genie App.