User's Manual

3
• Expanding and Folding the Mini-P main body
a. Folded Status
Slide the slide lock and rotate the gimbal 180° anticlockwise.Then it
locks automatically.
b. Expanded Status
Slide the slide lock and rotate the gimbal 180° clockwise. Then it
locks automatically.
Mini-P Installation
• Storage and Expand the Mini-P
Mini-P is equipped with three axes storage lock for gimbal storage, to
protect from constant movement.
a. Slide the tilt storage lock on the roll arm(Picture a), slide the tilt arm
downwards(Picture b), place the L-Bracket lock knob into the tilt
storage lock groove, then the tilt motor storage is complete.
b. Slide the roll arm downwards, place the roll arm between the 2
bosses on the silicone sleeve of the pan motor (Picture b), then
the roll motor storage is complete.
c. Slide the pan motor lock upwards(Picture c) then the pan motor
storage is complete.
Reverse the above steps to expand the gimbal
• Attaching the Tripod
a. Screw the tripod tightly into the 1/4" hole at the bottom of the
gimbal.
b. Extend the three support feets, place the gimbal on a flat surface
a
a b c
b
a b
1
2
1
2